Our tradesman can install all or part of your new hot water system!

• A System change is when the old hot water system is the same type of hot water system that is installed - for example if it is an on roof solar we change over the main components on the roof - including hot/cold pipes, relief valve plus a new premium high performance tempering valve is included where needed - we also reseal any roof penetrations and check the roof under the solar in between the changeover.

• A Full install is when the older system is a different type of hot water system than the new one being installed. We provide all new pipe work where needed in high quality copper. New Australian made premium cold water valves are provided, a new premium tempering valve is installed. All electrics, gas and plumbing is all carried out by fully licensed tradesmen, and where possible trades completion certificates are provided on the spot.

• A Plonk on is where we bring the system to site, secure to roof/place on ground, but not carry out any plumbing, electrical or gas work. This is generally done with a new build, especially designed for on roof tanks as the tank and panel combination is bulky and we have the hiab vehicle and labour which is specially designed and trained to lift the systems.

We can carry out any combination of the above and come to site to give a free quote on new systems generally on the same day that we receive the request.

A major service on a new solar should be carried out between 4/5 years, and then every 3/4 years after that - although they must be physically inspected every 12 months at a minimum. It includes;

Flushing out sediment that can cause corrosion on solar panels

Clearing out filters on solar valves

Changing the P&T valve on the tank

Checking entire system on roof, or tank on ground for any defects or signs of leaking

Starts at $280 incl GST

A minor service on a split solar should be carried out every 2-3 years - although they must be physically inspected every 12 months. It includes;

Flushing out sediment that can cause corrosion on solar panels

Replacement of the check valve (non return valve on the pump)

Servicing of your electric circulator pump - including decalcification of your impellor

Testing of sensor lines and thermistor probes

Checking entire system on roof, or tank on ground for any defects or signs of leaking

Starts at $250 incl GST